DIVEVOLK Sealink Contact Type Underwater WiFi Signal Transmitter to connect Smartphone and Cmaerea

DIVEVOLK Sealink Contact Type Underwater WiFi Signal Transmitter to connect Smartphone and Cmaerea

Name: DIVEVOLK Sealink Contact Type Underwater WiFi Signal Transmitter to connect Smartphone and Cmaerea
Brand: DIVEVOLK
SKU: AW-11
Price: 199.00 USD
Availability: InStock

$199.00

The SeaLink Contact-Type Underwater Wi-Fi Signal Transmitter is uniquely designed to establish a Wi-Fi connection between your smartphone and camera under the water. By merely contacting the surfaces of the housings without the need for plugging in, this device facilitates an underwater signal connection. Through the camera application, your smartphone becomes a dynamic monitor, allowing you to adjust camera parameters such as ISO, shutter speed, aperture, and even utilize touch-screen focus. The app on your phone also enables easy playback of photos and videos in real-time.

Notice:

Please note that the efficiency of Wi-Fi signal transmission differs from HDMI cable transmission. With some cameras, there may be slight delays or occasional freezing in the image, which is a normal occurrence.

Quantity:

DIVEVOLK Sealink Contact Type Underwater WiFi Signal Transmitter to connect Smartphone and Cmaerea

$199.00

Features

Turn the smartphone to and underwater monitor of the camera
Remote control the parameters of the camera
Multi-angle view finder
Adapt to most of the camera housing

Specifications

Model # AW-11

Frequency: 2.4G/5G/5.8G

Signal Gain: 6 dbi

Waterproof: 80 Meters

Wire Length: 30cm

Packing

What's included?

The SeaLinkTM contact-type underwater Wi-Fi signal transmitter
L shape bracket
I shape bracket
M6 screw x 4 pieces
1/4 screw x 1 piece
Gasket x3 pieces
Quick Start Guide
EVA packing case

Tutorials

Use two M6 screws to fix the sensor on the expansion clamp of the SeaTouch housing
Position the sensor on the edge of The SeaTouch housing
Use a M6 screw to fix the other sensor on the L shape bracket
Use a M6 screw to fix the L shape bracket on the I shape bracket
Use the 1/4 screw to fix the I shape bracket on the bottom of the camera housing

FAQ

Please position the sensor within the screen area of camera housing in case the aluminum alloy camera housing isolates the Wi-Fi signal.
Do not over-bend the wire, otherwise it will be damaged or affect the waterproof performance.
The SeaLinkTM Contact-type Wi-Fi signal transmitter needs to be installed on the expansion clamp of the SeaTouch housing.
It might be slight delay of the image transmission when using the Wi-Fi connection, the transmission status will vary depending of the performance of different camera.
It is recommended to complete the pairing and connection of the smartphone and the camera on land before launching into the water.
In order to use this product better, please watch the operation video before further use.

Turn the smartphone to and underwater monitor of the camera
Remote control the parameters of the camera
Multi-angle view finder
Adapt to most of the camera housing

DIVEVOLK Underwater Touchscreen Housing

Bring Phtography to Another Level

Dive into the mysteries of the deep and capture the wonders of light. Our SeaTouch 4 Max dive housing bring clarity to your underwater world, making every dive an unforgettable journey of light and shadow. Illuminate your adventures and record every brilliant moment.

DIVEVOLK Sealink Contact Type Underwater WiFi Signal Transmitter to connect Smartphone and Cmaerea

You may also like